3D Creative Night Light Lamp
The factory's acrylic 3D creative table lamp supports design, DIY, graphic, logo customization, and product design.
Acrylic pattern board custom 120 start
The current acrylic pattern print has 60 characters.
Starting at 60, you can print the keyboard, QR code and text on the side and plane of the lamp holder.
Note: For all custom order processes, the proofing fee is $100 and the proofing fee is paid by placing an order. If the sample is confirmed to be uncontroversial, a bulk order will be placed. The $100 proofing fee can be used to replace the purchase price or to place an order directly.
Lamp base illumination
imported ABS resin base, 3-color LED light source, 85V-265V wide voltage constant current drive.
Lamp holder vent
Fine vents for faster heat dissipation and longer life.
Remove the protective film
After receiving the baby, remove the protective film from the bulb to reveal a beautiful light bulb.
prompt:
The 3D panel is protected by a yellow protective film. When using, you need to remove the protective film. If it is difficult to tear it, it can be immersed in water and then peeled off.
Classic household plug
3C certified plugs and wires are safe and reliable. A home 110-220V voltage can be used.
Carefully adjusted 8 cm acrylic plate, showing naked eye 3D.
By reading the illumination light, it illuminates the trajectory of the aircraft, leaving a 3D effect of light and shadow.
Turn on the light to show the 3D effect
Light transmittance 98%
Laser engraving process
Optical grade acrylic
The lamp holder is ABS resin environmental protection material
Style introduction
Style 1: three-color switch button control: light color temperature: three-speed adjustable, white light + warm light + warm white light 50PCS / box power input: 85-265V (220v in-line)
Style 2: USB 5V touch switch models: RGB colorful dimming (red / green / blue / yellow / purple / white), adjustable fixed color / adjustable colorful gradient / adjustable colorful fast change, the base can be placed 3 5AA battery
Style 3: USB 5V touch switch + remote control switch: RGB colorful dimming (with 16 colors adjustable), adjustable fixed color / adjustable colorful flash / adjustable colorful slow flash / adjustable colorful fast change /, can Adjust the colorful gradient / adjustable light brightness, the base can put 3 5 batteries
Material: ABS base + acrylic
Switch mode: button / touch
Product power: 3W
Product voltage: 220v / 5V
Light board size: 160 * 130MM range
base size: 9.6 cm in diameter x 4 cm in height
Product color: three colors / colorful / 16 color
Power supply: plug in / USB / battery
Product accessories: Acrylic board 1 + 1 base
Product weight: 0.23~0.3KG
Single package: 20.5 * 14.5 * 5.5cm
Packing quantity: 50 sets / box
Packing weight: about 13KG-15KG
Outer box size: 75.5 * 28 * 42cm
[Maintenance of acrylic products]
First, the acrylic temperature will be deformed when heated at around 70 degrees. When heated to more than 100 degrees, it will soften, so it should be avoided to apply to alternating above 100 degrees.
Second, acrylic polishing, if it is a small scratch, you can wipe directly with toilet paper or a rag with a small amount of toothpaste.
Third, acrylic should be scrubbed with a soft cloth. Never use any cleaning agent that contains granular objects. Do not use a variety of chemical baths to scrub.
Fourth, acrylic is easily broken, and attention should be paid to surface protection when handling.
Fifth, the thermal expansion coefficient of acrylic penetrates. When placing or fixing, the temperature change should be gradually considered to leave room for expansion and contraction.
Sixth, if the acrylic product is not damaged, an IPS adhesive/adhesive transistor type adhesive or quick-drying agent can be used.
Seventh, if you want acrylic products to be bright and beautiful, you can use liquid polishing wax and wipe it with a soft cloth.