Popularize Hot: Lamp  LED  light  Flash  Cup  hot  stick  bracelet  Ice  Fan 

Automatic sensing switch disinfecting toilet lamp (48pcs/ctn)

Click to view the original image
 
From the grant 1-4ctn 5ctn the above
Price $758.40 $718.40
Brand: GMTLIGHT
Sales: Accumulated sell 1 ctn
Comment: Have 1 comment
Hits: Have 395 attention
Updated: 2020-11-17
Quantity: Decrease Plusctn Inventory 1999 ctn
BUY NOW   Add to shopping cart
 
Company Details
 

Automatic sensing switch disinfecting toilet lamp (48pcs/ctn)

- Item No.: LUL-B03

- Size: 138*72*27mm

- Material: ABS

- Body color: White

- Weight: 260g/pc

- Power supply: USB rechargeable

- Charging port: Type C

- Charging time: about 2.5 hours

- LED Type: UVC

- Power: 1.5W

- Input voltage: DC5V/1A

- Battery capacity: 1800mAh

- Wavelength range: 260-280nm

- Waterproof: Splashproof

- Packing details: 1pc/box; 48pcs/ctn; 39*29*34cm; 14/13KG

After some experiments, it is found that there are still as many as 100000 kinds of bacteria in the toilet which has been washed, and the biggest place for these bacteria to live is on the inner wall of the toilet.

UVC is one of the ultraviolet rays. The ultraviolet rays are divided into four bands: A / B / C / D. among them, the C-band has bactericidal effect, and in this band, the ultraviolet ray of 250-270nm is more powerful. Therefore, UVC is widely used in toilets, dining halls and families as disinfection lamps.

Sterilizing lamp installed on toilet

Portable wireless design, so that it can be used in any place where sterilization is needed. Install it on the inner surface of the toilet cover, close the lid, and it will start working in a short time. When it carries out sterilization work, there will be a beep to remind us that it is carrying out sterilization work.

More safety in use

When the product senses that the toilet cover is opened more than 45 degrees, it will automatically close to stop disinfection. When the toilet lid is closed again, the lamp will be switched on again, so that people can use it without fear of ultraviolet radiation.

Fashion design

The modeling design of this product is hierarchical and simple, which can be well integrated with various sanitary wares in the bathroom.


High quality materials get high quality products

White high-quality ABS material made of disinfection lamp, feel great, the texture of the product is impressive.

The operation is simple and easy

There is no complicated operation for people, just install it and turn on the switch to start disinfecting it. All you need to do is charge it regularly. Of course, it won't be a trivial matter in your life, because it can last about a month when it is fully charged.

High quality waterproof accessories

The product uses the high elastic surrounding silicone ring, which has the function of preventing splashing water, and can effectively prevent water and moisture, so that the product can work safely and stably.

Instructions:

1 - clean the inside of the toilet cover, and then tear off the double-sided adhesive tape on the back of the product.

2 - paste the product on the appropriate position of the toilet inner cover. The closer the product is to the central position, the better the disinfection effect will be.

3 - after installation, the switch can be started and the toilet cover can be closed. At this time, the disinfection function will automatically start to run, and there will be beeps as a prompt during the disinfection process. Each sterilization time will last 120 seconds.

4 - if the disinfection needs to be interrupted during the disinfection process, the toilet cover can be opened and the opening angle should be greater than 45 degrees. At this time, the disinfection lamp will automatically stop the disinfection mode.