Solar Powered -Motion Activated Animal Repeller
Name: solar ultrasonic mousetrap, snake repeller, electronic cat repeller, dog repeller
Package size: 150 * 160 * 80mm
Function: expel snakes, mice, insects, cats, dogs and animals
Principle: infrared detection, ultrasonic driving
Material composition: ABS environmental protection resin
Product packaging: neutral English color box (OEM)
Gross weight packed: 130g
Waterproof: Waterproof
Battery voltage, 4.8V
Packing quantity: PCS 30
Packing size: 382 * 320 * 490mm
Net / gross weight: 0.26/0 .33kg
Description:
This repelleris designed for permanent service allowing you to install it once and let itwork!
It is weather-proof allowing it to work all year-round and in virtuallyall weather conditions .
It uses solar power to recharge the batteries so it isalways working
Working Priciple
The Passive Infrared sensor(PIR) detects motion andtriggers the ultrasonic speaker emitting a tone that people cannot hear butchases away common outdoor pests like dogs,cats,deer,raccoons,mice,skunks,squirrels and more.
This solar animal repeller is a safe andhumane way to keep unwanted animals away! This is kind way to animals!
WARNING! Always check for underground utilities,cables orwires before digging or installing ! Failure to check could result inpersonal injury,property damage or even death.
Parts and Features:
The PIR repeller is designed to be left ON continuously. It uses four2/3AA size NI-MH rechargeable batteries
once turned ON,the red-LED light and ultrasonic signal will activate for 15seconds.Among the time ,there is sound waves for 2.5 seconds at the beginning.At the same time ,the white-LED lights flash blasting. Following this activation,
the unit will move to stand-by mode.
The unit is now ready for installation.The location should allow adequate sunlightTo keep the batteries fully charged.Be sure that the area needing protection iswithin the effective range of the repeller
For best results,keep the repeller head roughly9-10 inches above ground.
Specifications:
1.Unit Dimensions:5-1/2” W×3-1/2”D×14-1/3”h
2.Unit Weight: 8-1/2 ounces.
3.Power Supply:4*2/3AA Ni-MH rechargeable batteries.
4.Power Consumption: working=15mA standby≤10uA
5.Ultrasonic Frequency: 25-61KHZ
6.Coverage Area:30 feet@ 1100=2,425 square feet
CAUTION:
• Allow the Animal Repeller to operate continuously for best results.
• Do not immerse repeller in water.
• Do not cover-up the PIR sensor.
• To clean the repeller,use a damp-soft cloth and mild soap withWater.Do not use harsh chemicals or abrasive cleaning agentsThat may damage the repeller.